【COD】CBLUE Polyurethane PU Foam… · Real Review · Pain Point

[Style]: Realistic, practical DIY construction tutorial style. The footage is full of rich, authentic details, with the entire runtime focused on demonstrating PU foam adhesive application and the finished result. No unnecessary filters are used, presenting a pure, on-site construction workshop texture
[Environment]: A raw, unfinished wall scene under renovation. The wall is a bare cement plaster base, with a pre-cut groove reserved for embedding white PPR pipes marked with red identifiers. A hollow hole that penetrates the wall is pre-cut in the center of the groove. The space has ample, even natural lighting, the bright natural light of an indoor construction site
[Tone & Pacing]: Steady, pragmatic pacing that progresses step by step following the logic of 'pain point demonstration - product reveal - hands-on operation - final result presentation'. Every construction action is shown clearly and completely, matching the educational rhythm of renovation tutorial content
[Camera]: A first-person close-up fixed shot is used throughout the entire video. The camera stays focused on the construction area of the wall groove, with no large shaking movements, precisely capturing every detail of the foam adhesive being extruded, expanding and curing, and being trimmed
[Lighting]: Even, bright overhead indoor construction lighting is used. There are no obvious shadow dead zones, clearly revealing the rough texture of the cement wall, the details of the pipes, and the fluffy texture of the foam adhesive. The overall lighting is clean and crisp
[Character]: A Southeast Asian male construction worker around 30 years old, with tanned healthy skin, thin calluses on his palms from manual labor, wearing white nitrile gloves and blue safety goggles. Only part of his side face is visible, with sharp, capable facial features, no makeup, a well-proportioned and agile build, dressed in a red short-sleeved work shirt and blue denim bottoms. He has a professional, pragmatic demeanor, performs movements skillfully and neatly, and looks focused and serious while demonstrating

[Shots]
Shot 1:
  - Duration: 0.0sec - 3.0sec
  - Scene Type: Highlight the pain point problem
  - Scene: Close-up shot facing directly at the pre-reserved grooved hollow area on the wall. Two sections of white PPR pipes with red markings are disconnected at the hollow. A hand wearing white gloves reaches into the frame from the bottom right corner, with the fingertip pointing precisely at the hollow position where the pipes are disconnected, clearly demonstrating the gap in the wall that causes air and heat leakage issues.
  - Subject: Hindi na lalabas ang aircon nyo at hindi na magagalit ang mama.
Shot 2:
  - Duration: 3.0sec - 5.5sec
  - Scene Type: Product reveal
  - Scene: The camera pans slightly to the left, revealing the construction worker standing next to the wall. He holds a 750ml PU foam adhesive can with a green and yellow label printed with a cartoon worker pattern with both hands, showing the full appearance of the product to the camera, then adjusts the spray nozzle accessory of the can to prepare for construction work.
  - Subject: mo kapag gumamit ka nito.  Ganito ang ginagamit sa sauce
Shot 3:
  - Duration: 5.5sec - 11.0sec
  - Scene Type: Demonstrate the operation
  - Scene: The camera cuts back to a close-up of the wall hollow. The gloved hand of the construction worker grips the long spray tube of the foam adhesive, inserts the spray tube deep into the hollow inside the wall, and slowly presses the handle of the can. Off-white polyurethane foam continuously extrudes from the nozzle, gradually filling the gaps in the hollow. The foam expands rapidly in volume, firmly wrapping the connecting position of the upper and lower pipe sections.
  - Subject: para hindi makapasok ang init sa loob ng bahay. Ito ang nakakatulong para mas lumakas ang lamig ng aircon
Shot 4:
  - Duration: 11.0sec - 14.5sec
  - Scene Type: Demonstrate product effectiveness
  - Scene: The camera shows the fully cured state of the foam adhesive. The original hollow is completely filled with fluffy, elastic off-white foam that fits tightly against the cement wall and the outer wall of the pipes. A fingertip wearing white gloves gently presses the surface of the foam adhesive, demonstrating its firm, solid texture after curing.
  - Subject: at mas mabawasan  ang gastos  sa kuryente.  Ito ang
Shot 5:
  - Duration: 14.5sec - 18.5sec
  - Scene Type: Show ease of use
  - Scene: A hand wearing white gloves holds a utility knife, precisely trimming off the excess part of the foam adhesive that protrudes above the wall surface little by little, following the contour of the wall groove. The trimmed foam adhesive has a smooth surface, almost flush with the surrounding cement wall, perfectly sealing the penetrating gap in the wall.
  - Subject: foam spray na nagtatakip ng gap ng aircon at ibang sulungan.
Shot 6:
  - Duration: 18.5sec - 20.5sec
  - Scene Type: Summarize the final effect
  - Scene: The construction worker's hand picks up the PU foam adhesive can again, placing the can next to the trimmed, smooth and neat finished foam adhesive work. The product and the final sealing effect are displayed in the same frame, completing the closing demonstration of the entire tutorial.
  - Subject: sa bahay.
[Background Sound]:
- No background music at all; the entire video is accompanied only by the creator's authentic spoken Filipino narration, with clear, down-to-earth enunciation and a casual, conversational sharing tone
[Transition / Editing]:
- Smooth seamless jump cuts within the same scene, naturally transitioning from pain point demonstration to product introduction, hands-on operation, and final result presentation. There are no abrupt shot switches, following the smooth viewing logic of renovation tutorial content